海藻酸-磷脂微囊复合水凝胶的制备、表征及毒理学分析

采用薄膜分散法合成磷脂微囊,根据胶粒的双电层理论,通过在微囊中加入氯化锰、氯化钙和氯化镁电解质溶液,使微囊处于相对稳定的状态.研究发现加入氯化锰和氯化钙溶液,微囊胶体的粒径没有明显的变化,但加入一定浓度氯化镁溶液,其粒径明显变大.为了进一步增加磷脂微囊稳定性,将氯化锰、氯化钙、氯化镁磷脂微囊胶体分别与海藻酸钠(SA)溶液混合.结果表明,氯化镁与SA几乎不能形成水凝胶,氯化钙与SA形成水凝胶能力强于氯化锰.微囊胶体溶液中的磷脂酰丝氨酸(PS)可以与Ca~(2+)和Mg~(2+)键合形成PS-Ca~(2+)和PS-Mg~(2+),但不能与Mn~(2+)键合形成PS-Mn~(2+).对氯化钙磷脂微囊与海藻酸钠合成的复合水凝胶的形貌、溶胀率及细胞毒性进行了表征,结果表明,氯化钙与SA形成的水凝胶可以捕获胶体中磷脂微囊,且形貌规整,结构稳定,无细胞毒性.     

The influence of laser and powder defocusing characteristics on the surface quality in laser direct metal deposition

To investigate the influencing rules of the variations of powder and laser defocusing distance on surface quality and obtain the smooth surface of parts in laser direct metal deposition, the thin-walled metal parts were fabricated under three different powder defocusing distances and three different laser defocusing distances conditions. The experimental results show that a high surface quality can be obtained with the powder focussed below the substrate and laser focussed above the substrate process, and the variation in which the powder focus moves from above to below the melt pool plays a leading role and the variation in which the laser focus moves from above to below the melt pool plays a supplementary role in the influence on the surface quality. To explain the experimental results, a simple model of the track height is established.     

Synthesis of novel side‐chain triphenylamine polymers with azobenzene moieties via RAFT polymerization and investigation on their photoelectric properties

Two novel and well‐defined polymers, poly[6‐(5‐(diphenylamino)‐2‐((4‐methoxyphenyl)diazenyl)phenoxy)hexyl methacrylate] (PDMMA) and poly[6‐(4‐((3‐ethynylphenyl)diazenyl) phenoxy)hexyl methacrylate] (PDPMMA), which bear triphenylamine (TPA) incorporated to azobenzene either directly (PDMMA) or with an interval (PDPMMA) as pendant groups were successfully prepared via reversible addition‐fragmentation chain transfer polymerization technique. The electrochemical behaviors of PDPMMA and PDMMA were investigated by cyclic voltammograms (CV) measurement. The hole mobilities of the polymer films were determined by fitting the J‐V (current‐voltage) curve into the space‐charge‐limited current method. The influence of photoisomerization of the azobenzene moiety on the behaviors of fluorescence emission, CV and hole mobilities of these two polymers were studied. The fluorescent emission intensities of these two polymers in CH₂Cl₂ were increased by about 100 times after UV irradiation. The oxidation peak currents (I_OX) of the PDMMA and PDPMMA in CH₂Cl₂ were increased after UV irradiation. The photoisomerization of the azobenzene moiety in PDMMA had significant effect on the electrochemical behavior, compared with that in PDPMMA. The changes of the hole mobility before and after UV irradiation were very small for both polymers. The HOMO energies (E_HOMO, HOMO: the highest occupied molecular orbital) of side chain moieties of TPA incorporated with cis‐isomer and trans‐isomer of azobenzene in PDMMA and PDPMMA were obtained by theoretical calculation, which are basically consistent with the experimental results. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Experimental investigation of secondary reactions of intermediates in delayed coking

We report an experimental investigation of secondary reactions of intermediates in delayed coking. Thermal cracking reactions of intermediates, for example coker naphtha (C₅ ~180?°C), light coker gas oil (LCGO, 180?C350?°C), middle coker gas oil (MCGO, 350?C440?°C), and heavy coker gas oil (HCGO, >440?°C), were investigated. The results reveal that cracking of coker naphtha and LCGO is low under these experimental conditions. Thermal cracking MCGO exceeds that of LCGO. Among all the intermediates, thermal cracking is greatest for HCGO. The secondary reactions of HCGO produce not only gas and liquid products, but also coke. This increase in the yields of gas and coke is attributed to secondary reactions of HCGO and MCGO. Inhibition of the secondary reactions of intermediates results in a greater yield of liquid.